TK Turbojet FI fuel controller Lambda

Fuel injection management box Turbojet Lambda by Turbokit.
The Turbo Kit injection module is one of the easiest ways to adjust the fuel / air composition. Injection systems are complex electronic units and it proves difficult to make adjustments required when tuning.
The Turbo Jet module is easily connected and fuel can then be controlled by adjusting the knob. The supplied connectors fit the listed model scooters without any modification required, simply plug in and play.
All modules turbojet IAT ( intake air temperature ) can be connected to the existing intake air temperature sensor on the vehicle . Remove connector with ignition OFF and connect to the module. The sensor is replaced by the module as it were , and remain without function in the vehicle .
All turbojet lambda modules are connected in the same way with the connector on the oxygen probe.
It is recommended the setting from zero gradually increase until the engine runs smoothly and has the best performance. Standard motors without tuning measures, the best performance is usually 2 to 4 Easy tuning levels with sport air filter and sports exhaust to 6 Vehicles that do not use more catalyst after 6 to 8 conversions
The injection module fits in the following maxi-scooters

KYMCO Vexon AFI 250 (2006), Xciting 250 (2006-2012) Injection, Yager GT 200 (2006)

PEUGEOT Geopolis 125 (2006), Geopolis Compressor (2006), satellite RS 125 (2012), Satelis 125 (2006)